Linx Ares Honey Straw

Linx Ares Honey Straw

The Linx Ares honey straw embodies portability and innovation thanks to its ceramic rod atomizer, eliminating any loading and effort.

Powerful Vapor: The ceramic rod atomizer heats up fast and delivers incredibly powerful flavor. The Ares emphasizes fresh flavor thanks to its quality source materials and patented design.

No Reclaim:  Ares eliminates the loading process. Simply dip the pen in your favorite extracts and get a fresh hit each and every time. No more reclaim and no more waste.

Patented Design:  With its patented design and coil-less ceramic rod atomizer, the Ares delivers large vapor and incredible flavor, all in a sleek and discreet pen-shape style.

Easy Maintenance:  The Ares can be disassembled into multiple components, making cleaning safe and easy. This leaves you with less work and more time for the good stuff.

Specifications:

1.  Unscrew battery from power button section.
2. Screw the USB charge on the battery and plug into a viable USB power outlet.
3. The LED light on the charge glows red while charging and turns green once fully charged.  Full charge takes 2-3 hours

Locking / Unlocking:

Press power button 5 times quickly to turn the device on or off.  The button will blink 5 times.  Device will flash 10 times an automatically shut off if left idle for one minute.

Temperature Settings:

1.  Press power button 3 times quickly to choose from low and high temperatures (900° and 1100°)
2. The light flashes once when low temperature is selected and twice when high temperature is selected.

Vaping:

1.  Gently touch the tip of the Ares atomizer to the concentrate in the container.  Do not submerge the ceramic rod housing into the concentrated.
2. Inhale while holding the power button.
3. Release the power button to stop heating.

• If the power button is held down for 15 seconds the battery will enter standby mode to prevent overheating.  This is signified by the button blinking white 3 time.  After one minute in standby mode device will flash 10 times and power off.

Cleaning:

1.  Completely disassemble the Linx Ares into parts.
2. Use isopropyl alcohol and Q-Tips to swab all surfaces and air paths.
3. Use Ares cleaning brush to clean air hole in the power button section.
4. Do no submerge Linx Ares battery in any liquid.
5. Allow all components to completely dry before reassembling.